Rjs Inspector D4000 Auto Optic (FIRMWARE version A.06 Manual do Utilizador Página 48
- Página / 84
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Appendix C Operator’s Guide
RJS, Minneapolis, MN 002-5564
The parameter grade is determined by:
1. Calculating the edge contrast of every element
edge in a symbol
2. Finding the lowest value (minimum edge contrast)
3. Comparing it to a fixed threshold in the specifica-
tion (15%)
If the value is at least as great at the threshold, the
grade is “A,” otherwise the grade is “F.”
Symbol Contrast
This parameter can be graded “A,” “B,” “C,” “D,” or “F.”
Symbol contrast is the difference in reflectance values of
the “lightest” space (including the quiet zone) and the
“darkest” bar of the symbol (the greater the difference,
the higher the grade).
Note: Bar code colors can have a large effect on this
parameter.
Modulation
This parameter can be graded “A,” “B,” “C,” “D,” or “F.”
Modulation grade is based on the relationship between
the minimum edge contrast and the symbol contrast.
Ideally, the edge contrast should be equal to symbol
contrast, but as an aperture size approaches an element
size the amplitude of the signal received will decrease
and the edge contrast will decrease.
The greater the difference between minimum edge
contrast and symbol contrast, the lower the grade.
Note: Aperture size has the greatest affect on Modula-
tion. The substrate material can also have a major affect
on Modulation.
- TO FIRMWARE A.06 OR LATER 1
- All Rights Reserved 3
- TABLE OF CONTENTS 5
- ARAMETER/ERROR MESSAGE) 34 6
- 1.0 Preface 9
- 2.0 Warranty 13
- 3.0 Introduction 15
- Power On 18
- Example: 18
- Calibrating the Unit 19
- Scan Calib Setup 21
- Storage Inactive 21
- D4000A Ver x.xx 21
- Scans/Analysis 24
- Single 24
- Decode 3of9 as 24
- Code 3of9 24
- Decode I 2of 5 as 25
- Std I 2of5 25
- Decode C128 as 25
- Std 128 25
- UPC/EAN Tol 26
- 116 - 150% Mag 26
- Store and Print buffer 28
- 6.0 PCS Analysis 29
- PCS 87% Req 75% 29
- Rmn 03% eRmx 90% 29
- Note: 30
- *1234ABCEDF456* 31
- 3of9 Pass AB-CDF 31
- Grade A/06/660 31
- 4.0/06/660 31
- 01 Scans Remain 32
- Analysis Screen) 33
- 9.0 Data Analysis Screens 34
- Ratio: 1.7 F 35
- -100% Tol. +100% 35
- --------RRARR+++ 35
- ------RRARR+++++ 36
- Defects 07% A 39
- Appl. Compl. A 39
- *1234ABCDEF456* 39
- Acceptable 40
- Modck: 0 Pass 40
- Expect:0 40
- Connect to Computer 41
- Connect to Printer 41
- Appendix A Operator’s Guide 42
- Modck: 1 5 PASS 44
- Expect: 1 5 44
- Modck: 0 CHK 44
- Expect: 1 44
- ISO/ANSI Parameter Grading 46
- Symbol Contrast 48
- Modulation 48
- Defects 49
- Reference Decode 49
- Decodability 50
- Addendums) 52
- Appendix E (Code 128) 53
- * C L C 1 3 ? * 54
- Appendix E Operator’s Guide 60
- Appendix F (Magnifications) 61
- Appendix G Operator’s Guide 62
- Appendix H (Print Functions) 63
- Printout Type 63
- Analysis Only 63
- Appendix H Operator’s Guide 64
- Appendix I (Computer Mode) 65
- Text Analysis 66
- Low Battery 67
- Replace Battery 67
- Appendix K Operator’s Guide 68
- Operator’s Guide Appendix K 69
- 4.0 = A 82
- 3.0 = B 82
- 2.0 = C 82
- 1.0 = D 82
- 0.0 = F 82
Manuais e produtos relacionados com Scanners Rjs Inspector D4000 Auto Optic (FIRMWARE version A.06
(81 páginas)Santec 1455RP manuals
Owner’s manuals and user’s guides for Accessories for water Santec 1455RP.
We providing 1 pdf manuals Santec 1455RP for download free by document types: User Manual
Comentários a estes Manuais