Rjs Inspector D4000 Auto Optic (FIRMWARE version A.06 Manual do Utilizador descarregar pdf (Página 30)

Inspector D4000™ Auto Optic Operator’s Guide

RJS, Minneapolis, MN 002-5564

7.0 Scanning Symbols

Scanning Techniques

 Lay the symbol to be scanned on a flat, non-

reflective surface.

 For greatest accuracy scan a symbol more than

once, in both directions.

 Begin a scan from the “quiet zone”, two inches (5

cm) before the symbol. See Appendix D for details

 Make sure the scan head is flat against the symbol.

 Move the scan head across the symbol in a smooth

motion. A constant speed of 5 to 10 inches

(13-25 cm) per second is ideal. Scanning too fast

will cause the LCD display to read “Please Scan

Slower” but faster is ALWAYS better than slower.

Scanning Results

After a bar code is scanned, the RJS Inspector D4000

will respond with a crisp, chirp (or beep) sound.

Inspector Display after a scan when set to multiple scan

analysis:

01928374

01 Scans Remain.

Press Select to view the grade for the previous scan:

01928374

C39 Pass ABC-DF

Grade B/06/660

3.0/06/660

Note:

See 8.0 Pass/Fail Analysis Screen section for details the

inspection tests and results

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 83 84

Sem comentários

Rjs Inspector D4000 Auto Optic (FIRMWARE version A.06 Manual do Utilizador Página 30